3-Dimensional Drainage Composite | DELTA®-NaturaDRAIN

Accessories

DELTA-NaturaDRAIN

DELTA®-NaturaDRAIN is a high performance, 3-dimensional drainage composite with three layers. It consists of a dimpled drainage core and two layers of high strength polypropylene (PP) goetextile. One geotexitle (gray) is heat-bonded to dimples, the other geotextile (white) is fully adhered to the backside of the drainage core. Provides a smooth surface for the application of liquid applied waterproofing membrane. The drainage core is made from a special high-density polyethylene (HDPE) that provides high impact-and tear-resistance and is unaffected by environmental stress-cracking. The non-clogging geotextile is fully bonded to the dimpled drainage core, which prevents it from being pushed into the flow channels

Accessories

DELTA-NaturaDRAIN

DELTA®-NaturaDRAIN is a high performance, 3-dimensional drainage composite with three layers. It consists of a dimpled drainage core and two layers of high strength polypropylene (PP) goetextile. One geotexitle (gray) is heat-bonded to dimples, the other geotextile (white) is fully adhered to the backside of the drainage core. Provides a smooth surface for the application of liquid applied waterproofing membrane. The drainage core is made from a special high-density polyethylene (HDPE) that provides high impact-and tear-resistance and is unaffected by environmental stress-cracking. The non-clogging geotextile is fully bonded to the dimpled drainage core, which prevents it from being pushed into the flow channels

Features & Benefits

DELTA®-NaturaDRAIN features a fully laminated reinforcement cloth on the negative side, which acts as a carrying sheet for blindside/ bathtub applications
DELTA®-NaturaDRAIN provides a continuous path for water discharge and relieves hydrostatic pressure buildup
The non- woven geotextile allows water to pass freely into the drainage core
The geotextile meets AASHTO M288 Class 3 for elongation > 50%
DELTA®-NaturaDRAIN is the ideal solution for applications where high drainage capacity is required
Subsurface water can pass easily into the drainage core where gravity feeds it into the drainage system at the bottom of the foundation
DELTA®-NaturaDRAIN is highly pressure resistant and able to withstand loads of up to 7,300 psf (350 kN/m2)
The product is rot-proof

Storage & Use

It is suitable for applications in underground wall construction, caisson, pile and lagging wall drainage, retaining walls, bridge abutments, and as relief layer for hydrostatic pressure on any subsurface structure
It will also function as protection board in a waterproofing system
DELTA®-NaturaDRAIN comes in 7′ – 10″ x 41′ (2.4m x 12.5m)

Contact NaturaSeal for further queries!