Damp Proofing

Post-applied

Pre-applied

Hardscape

Softscape

Kitchen & Bathrooms

Water Tanks

Swimming Pool & Fountains

Bridge Deck Waterproofing

Tunnel Waterproofing

Pipe Wrapping

Outverted

Inverted

Impermeable

Permeable

Related Accessories

Heavy Duty Coating

Light Duty Coating

Waterproofing

TDS - DAMPSEAL E500 DPE

MSDS - DAMPSEAL E500 DPE

LEED - DAMPSEAL E500 DPE

TDS - SPRAYSEAL F300 BG

MSDS - SPRAYSEAL F300 BG

LEED - SPRAYSEAL F300 BG

TDS - SPRAYSEAL F300 BGP

MSDS - SPRAYSEAL F300 BGP

LEED - SPRAYSEAL F300 BGP

TDS - SPRAYSEAL F300 BGE

Typical Details - SPRAYSEAL F300 BGE

LEED - SPRAYSEAL F300 BGE

Roof Waterproofing

Walls

Flooring

ACCESSORIES

Centre d'information

Documents

De A à Z

De Z à A

Date asc

Date desc

Technical Data Sheet

MSDS

Sustainability

Typical Details

GeotexSeal&trade; B700 RF is a needle-punched, uniform high-performance, nonwoven geotextile made of 100% polypropylene staple fibers and free of chemical binder.

GEOTEXSEAL B700 RF

GeotexSeal&trade; B700 MF is composed of continuous synthetic polyester fibers bonded through a mechanical needle-punch process. It is especially recommended for reinforcing liquid waterproofing membranes. This specialized fabric enhances the performance of liquid-applied membranes by improving their toughness, puncture resistance, elongation capacity, and crack-bridging ability.

GEOTEXSEAL B700 MF

NovaSet&reg; R250 ISW is a fluid-applied, seamless roof membrane. It is composed of an advanced engineered blend of thermo-active polymerized modified emulsion (PME) technology. This monolithic, fully bonded, and self-healing waterborne roof &nbsp;membrane provides superior resistance and longevity for a multitude of high-performance waterproofing applications.

NovaSet R250 ISW

NovaSet&reg; M600 TG is a unique trowel applied mastic, caulking material and joint filler. &nbsp;It is composed of an advanced engineered blend of thermo-active polymerized modified emulsion (PME) technology. This fully bonded, and self-healing waterborne mastic material provides superior resistance and longevity for a multitude of high-performance and complex detailing applications.

NOVASET M600 TG

NovaSet&reg; M600 BR is a unique brush, roller or squeegee applied flashing material. It is composed of an advanced engineered blend of thermo-active polymerized modified emulsion (PME) technology. This fully bonded, and self-healing waterborne flashing material provides superior resistance and longevity for a multitude of high-performance and complex detailing applications.

NOVASET M600 BR

SpraySeal&trade; F300 BGE is a pre-applied, fully bonded, waterproofing system comprised of RollnSeal&trade; B700 HD heavy duty, composite (HSPE) waterproofing sheet membrane pre-laminated to high strength Polypropylene (PP) geotextile and SpraySeal F300 BGP a proprietary Polymerized Modified Asphalt Emulsion (PMAE) technology. The elastomeric waterproofing coating is a post blended and instant-setting fluid-applied membrane formulated from organic compounds. The assembly will form a unique pre-applied, integrally bonded, monolithic (seamless), self sealing and non-permeable waterproofing system designed to have tenacious adhesion, reliability, longevity, durability with a DUO LOCK MECHANISM&trade;.

SpraySeal F300 BGE

SpraySeal&trade; F300 BGD is a pre-applied, bonded, waterproofing system comprised of RollnSeal&trade; B700 HD high performance, composite (HSPE) waterproofing carrier sheet membrane pre-laminated to Polypropylene (PP) geotextile and SpraySeal F300 BG a proprietary Polymerized Modified Asphalt Emulsion (PMAE) technology. The elastomeric waterproofing coating is a post blended and instant-setting fluid-applied membrane formulated from organic compounds. The assembly will form a unique pre-applied, integrally bonded, monolithic (seamless), self sealing and non-permeable waterproofing system designed for low hydrostatic pressure below-grade foundations &nbsp;with a DUO LOCK MECHANISM&trade;.

SPRAYSEAL F300 BGD

PMAE&trade; B700 Catalyst is a purified inorganic mineral used as the accelerating component for the NaturaSeal&rsquo;s fluid-applied instant setting PMAE waterproofing technology.

PMAE B700 CATALYST

RollnSeal B700 HD is a 2-dimensional, HSPE (high strength Polyethylene) pre-applied waterproofing bonded system carrier sheet designed for heavy duty vertical and horizontal deep substructure applications. It is specially formulated using 100% virgin resin and high strength polypropylene (PP) geotextile. The select blend contains antioxidants &nbsp;that provides a high environmental stress crack resistance to alkalis and acids found in the soil and ensures a smooth, superior quality membrane. Our special extrusion process utilize low heat and low shear to prevent heat degradation in the finished product.

ROLLNSEAL B700 HD

TUFFDECK GRIPCOAT is a three component (resin, hardener, and water), fast drying, waterborne, epoxy primer with low VOC and low odor. For use on concrete, wood, modified bitumen, and asphalt. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

TUFFDECK GRIPCOAT

TUFFDECK 810/850 is a two component, fast setting, rapid curing, solvent free, flexible, high performance, high solids, urethane-elastomer base membrane that can be applied to prepared interior or exterior concrete, plywood and metal surfaces. Due to its fast gel time, TUFFDECK 810/850 is suitable for applications in temperatures as low as 20&deg;F (-6.7&deg;C). It may be applied in a single application or in multiple applications. TUFFDECK 810/850 is also relatively insensitive to moisture and temperature, allowing applications in various temperatures and humidity Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.installation of product.

TUFFDECK 810-850

NS-TD Tape is a pressure sensitive tape for covering joints in metal flashings, plywood and in other concrete surfaces. It is a 5 mil (127 microns) thick laminated, spun bonded, polyester based, substrate reinforced with hybrid polyester fibers. 
These fibers have been created to provide high modulus of strength on initial impact. The adhesive is a highly-aggressive acrylic system that delivers high-tack and high-shear strength. The adhesive has excellent cold temperature and condensation resistance with an extremely wide application gradient and a built-in ultra-violet stabilizer system. NS-TD Tape is excellent at creating an isolation interface between two incompatible substrates.

NS-TD-TAPE

PatchSeal&trade; A250 TG is a single component proprietary Polymerized Modified Asphalt Emulsion (PMAE) Technology formulated from organic compounds. This elastomeric (trowel) applied waterproofing coating is highly versatile and can be used for a variety of waterproofing and detailing applications, both indoors and outdoors.

PATCHSEAL A250 TG

BrushSeal&trade; A250 BR is a single component proprietary Polymerized Modified Asphalt Emulsion (PMAE) Technology formulated from organic compounds. This elastomeric (brush or roller) applied waterproofing coating is highly versatile and can be used for a variety of waterproofing and detailing applications, both indoors and outdoors.

BRUSHSEAL A250 BR

SpraySeal&trade; A250 HP is a proprietary Polymerized Modified Asphalt Emulsion (PMAE) technology formulated from organic compounds. This elastomeric waterproofing coating is a post blended and instant-setting spray-applied to form a flexible, seamless, non-permeable waterproofing membrane.

SPRAYSEAL A250 HP

SpraySeal&trade; A250 LP is a proprietary Polymerized Modified Asphalt Emulsion (PMAE) technology formulated from organic compounds. This elastomeric waterproofing coating is a post blended and instant-setting spray-applied to form a flexible, seamless, non-permeable waterproofing membrane.

SPRAYSEAL A250 LP

SpraySeal&trade; R200 SPM is a proprietary Polymerized Modified Asphalt Emulsion (PMAE) technology formulated from organic compounds. This elastomeric coating is a post blended and instant-setting spray-applied to form a flexible roof waterproofing membrane.

SPRAYSEAL R200 SPM

MineSeal&trade; C400 RC is a proprietary Polymerized Modified Asphalt Emulsion (PMAE) technology formulated from organic compounds. This elastomeric waterproofing coating is a post blended and instant-setting spray-applied to form a flexible, seamless, non-permeable high performance waterproofing membrane.

MINESEAL C400 ACM

SpraySeal&trade; C500 CEW is a proprietary Polymerized Modified Asphalt Emulsion (PMAE) technology formulated from organic compounds. This elastomeric waterproofing coating is a post blended and instant-setting spray-applied to form a flexible, seamless, non-permeable waterproofing membrane.

SPRAYSEAL C400 CEW

BrushSeal&trade; H100 WA is a proprietary fluid-applied, single pack elastomeric waterproofing coating. This elastomeric (brush or roller) applied coating is highly versatile and can be used for a variety of waterproofing and detailing applications, both indoors and outdoors.

BRUSHSEAL H100 WA

SpraySeal&trade; H100 WF is a proprietary Polymerized Modified Asphalt Emulsion (PMAE) technology formulated from organic compounds. This elastomeric waterproofing coating is a post blended and instant-setting spray-applied to form a flexible, seamless, non-permeable waterproofing membrane.

SPRAYSEAL H100 WF

SpraySeal&trade; P800 HDP is a proprietary Polymerized Modified Asphalt Emulsion (PMAE) technology formulated from organic compounds. This elastomeric waterproofing coating is a post blended and instant-setting spray-applied to form a flexible, seamless, non-permeable waterproofing membrane.

SPRAYSEAL P800 HDP

SpraySeal&trade; P800 HD is a proprietary Polymerized Modified Asphalt Emulsion (PMAE) technology formulated from organic compounds. This elastomeric waterproofing coating is a post blended and instant-setting spray-applied to form a flexible, seamless, non-permeable waterproofing membrane.

SPRAYSEAL P800 HD

PatchSeal&trade; M600 TG is a proprietary Polymerized Modi-fied Asphalt Emulsion (PMAE) Technology formulated from organic compounds. This elastomeric trowel-ap-plied waterproofing coating is highly versatile and can be used for a variety of waterproofing and detailing applications, both indoors and outdoors.

PATCHSEAL M600 TG

BrushSeal&trade; M600 BR is a single component proprietary Polymerized Modified Asphalt Emulsion (PMAE) Technology formulated from organic compounds. This elastomeric (brush or roller) applied waterproofing coating is highly versatile and can be used for a variety of waterproofing and detailing applications, both indoors and outdoors.

BRUSHSEAL M600 BR

SpraySeal&trade; F300 BGP is a proprietary Polymerized Modiﬁed Asphalt Emulsion (PMAE) technology formulated from organic compounds. This elastomeric waterprooﬁng coating is a post blended and instant-setting spray-applied to form a ﬂexible, seamless, non-permeable waterprooﬁng membrane.

SPRAYSEAL F300 BGP

SpraySeal&trade; F300 BG is a proprietary Polymerized Modiﬁed Asphalt Emulsion (PMAE) technology formulated from organic compounds. This elastomeric waterprooﬁng coating is a post blended and instant-setting spray-applied to form a ﬂexible, seamless, non-permeable waterprooﬁng membrane.

SPRAYSEAL F300 BG

DampSeal&trade; E500 DPE is a rubberized bitumen emulsion supplied as a brown liquid which dries to form a black, ﬂexible coating